Fans were held in place by 4 nylon screws per fan. Removed the fans,
did a deep de-dusting of the fans, heat sinks and inside the chassis,
then carefully removed the labels from the fans and put 2 drops
of oil into each fan's axle.
Everything went back together, the fans are quieter, the fan that would
stop working momentarily is working normally, and I didn't break
anything or have screws left over!
| Sysop: | Denn |
|---|---|
| Location: | Clearfield, Utah |
| Users: | 46 |
| Nodes: | 15 (0 / 15) |
| Uptime: | 93:23:02 |
| Calls: | 992 |
| Files: | 38,178 |
| D/L today: |
23,481 files (3,487M bytes) |
| Messages: | 34,204 |